Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterArched & Curved Windows in Hialeah, FL
Arched and curved windows in Hialeah are custom-fabricated to fit non-rectangular openings – think our Custom & Geometric Windows services for half-moon transoms above front doors, elliptical accent windows in stucco facades, or full eyebrow arches that frame a foyer. Because no two arched openings are exactly alike, every job starts with precise field measurements and ends with a unit built to that exact geometry. At Winslow Windows & Doors, Ed Winslow has been overseeing these installations in Hialeah since 2011, and the Done Right Promise backs every one of them. Call us at (850) 998-3090 – a live person answers around the clock – or read on to see what makes a curved-window project succeed in South Florida’s climate.
Our arched and curved window work falls under our broader Custom & Geometric Windows in Hialeah service, so if your home has other non-standard shapes – octagons, trapezoids, or full-circle ports – we handle those from the same truck, under the same guarantee.
When You Need Arched & Curved Windows
Not every project is an emergency, but there are situations where waiting costs more than moving quickly. Here are the most common reasons Hialeah homeowners call us about their arched or curved openings:
- Storm damage to an existing arched unit. Hialeah sits well inside Miami-Dade County’s High-Velocity Hurricane Zone (HVHZ), and a single bad season can crack or delaminate the glass in a curved transom. A broken arched unit is not a standard off-the-shelf replacement – it has to be custom-ordered to your exact radius, so the sooner you call, the sooner that order is placed.
- Upgrading old, single-pane arched glass to impact-rated units. Many Hialeah homes built in the 1970s and 1980s have decorative arched transoms that were never designed for hurricane loads. Replacing them with PGT or CGI impact-rated curved units brings the home up to current Miami-Dade NOA (Notice of Acceptance) standards and can meaningfully affect your insurance premium.
- Fogged or delaminated glass inside the arch. When the seal fails on an insulated curved unit, condensation gets trapped between the panes. In Hialeah’s humidity – which runs above 70% for most of the year – that moisture accelerates and the fog never clears. A failed seal means the insulating gas is gone, and the unit needs to be replaced, not just re-sealed.
- A remodel or addition that includes a new arched opening. Palermo Lakes, Westland, and the older neighborhoods near East 4th Avenue all have homes where owners are adding a new front entry or expanding a living room with a custom arched window as a focal point. Getting the rough opening and the window spec aligned from the start saves costly re-framing later.
- Matching an original arched window after an addition. If you have three matching arched windows across the front of a mid-century Hialeah home and one is being replaced or a fourth is being added, the radius, sightlines, and frame color have to match within tight tolerances. This is custom work, not catalog work.
- Energy loss through an uninsulated or single-pane arch. Arched windows that sit high on a south- or west-facing wall in Hialeah absorb significant solar heat. A low-E, impact-rated curved unit from a brand like ViewLux or CGI can reduce that solar heat gain substantially – and your AC doesn’t have to work as hard to compensate.
Our Arched & Curved Windows Process
Custom curved work has no room for approximation. Here is exactly how we move a project from phone call to finished installation:
- On-site measurement and assessment. Ed or one of our background-checked, uniformed technicians comes to your Hialeah home to take precise field measurements of the rough opening – the exact radius of the arch, the width at the sill, the depth of the jamb, and the condition of the surrounding frame and stucco. We photograph the opening and note any signs of moisture intrusion or frame rot that need to be addressed before the new unit goes in. There is no trip charge for this visit inside Miami-Dade County.
- Product selection and specification. Based on your opening’s geometry, the wall’s Miami-Dade NOA requirements, and your energy and aesthetic goals, we recommend the right product. For impact-rated arched units in Hialeah, PGT and CGI both manufacture custom-radius curved windows that carry Miami-Dade approval. We walk you through frame color, glass type (clear, Low-E, or tinted), and hardware before anything is ordered.
- Upfront written quote. You get a line-item price in writing before we place a single order. No ballpark. No “we’ll figure it out once the unit arrives.” Upfront pricing is a standing commitment at Winslow – what we quote is what you pay unless the scope changes and you approve it first.
- Custom fabrication order. Arched and curved units are built to order. Lead times vary by manufacturer and current demand, but we communicate every milestone – order confirmation, production completion, shipping arrival – so you are never left wondering where your window is.
- Installation day. Our technicians remove the old unit carefully, inspect and repair the rough opening if needed, set the new curved window with the correct flashing and sealant per Miami-Dade product approval requirements, and clean up completely before leaving. Stucco patching around the frame is included when the opening requires it so the exterior looks finished, not patched.
- Final walkthrough and documentation. Before we leave, we walk through the installation with you, confirm the unit operates correctly (on operable units), and hand you the product warranty documentation. The Done Right Promise kicks in at this moment: if anything about the installation is not right, we come back and make it right – no negotiation, no expiration date.
Arched & Curved Windows Pricing in Hialeah
Arched and curved windows cost more than standard rectangular units because they are built to order for a specific radius and opening size. The range below reflects real Hialeah project costs based on current material and labor conditions in the South Florida market – not national averages.
| Project Type | Typical Range (Installed) |
|---|---|
| Small fixed-arch transom (under 24″ wide), single unit | $480 – $750 |
| Mid-size half-round or elliptical transom (24″-48″ wide) | $750 – $1,400 |
| Large eyebrow or full-arch unit (48″ and wider) | $1,400 – $2,800+ |
| Impact-rated curved unit with Low-E glass (Miami-Dade NOA) | Add $200 – $600 to above ranges |
| Frame or rough-opening repair before installation | $150 – $500 depending on extent |
Several factors move a project toward the higher end of these ranges:
- Tight or irregular radius that requires additional custom templating
- Second-story or hard-to-access locations in older Hialeah two-story homes
- Frame rot or water damage in the rough opening that has to be remediated before the unit is set
- Matching an existing frame color or profile on a home with multiple arched units
- Miami-Dade HVHZ impact-rating requirement (affects glass and frame spec)
Seniors and veterans receive a permanent 10% discount on any project – just mention it when you call. And if your total comes to more than $200, the $40 off any repair offer applies automatically. We also offer free second opinions on any written estimate you have received from another contractor, so if a number feels high, call us before you sign anything.
The most accurate way to know what your specific arched window will cost is a free on-site estimate. Call (850) 998-3090 and we’ll schedule a visit at your convenience – no trip charge inside Miami-Dade County.
Why Hialeah Homes Have More Arched Windows Than You Might Expect
Hialeah’s residential architecture tells a specific story. The city developed heavily in the 1950s through 1980s, and Mediterranean Revival and Spanish Colonial styles dominated – both of which lean hard on arched openings. Drive through the neighborhoods near the Hialeah Park Racing & Casino, through Palm Springs North, or into the quieter streets off West 49th Street and you see it constantly: Geometric & Shaped Windows like arched front-door transoms, curved accent windows in stucco gables, and half-round windows sitting above jalousie or casement pairs.
Most of those original arched units were decorative, single-pane glass set in aluminum frames that were never designed for HVHZ hurricane loads. As Hialeah’s building department has tightened enforcement of Miami-Dade product approvals over the past decade, more homeowners are discovering that their charming old arch has to go – and that replacing it correctly means a Custom Impact Windows unit, not a trip to a home center.
That gap between what exists and what current code requires is exactly where we spend a lot of our time in Hialeah. It is not unusual for us to be the third or fourth contractor a homeowner has called, because the first two either couldn’t source a curved impact unit or quoted a Oversized Openings rectangular infill that would destroy the look of the home. We don’t do rectangular infills to avoid curved fabrication. If the opening is arched, the window we install is arched.
Impact Rating and Miami-Dade Compliance for Curved Units
Every window installed in Hialeah must meet Miami-Dade County’s High-Velocity Hurricane Zone standards. For standard rectangular windows, this is straightforward – there are dozens of off-the-shelf impact units with current NOA approval. For curved and arched units, it is more involved.
Custom-radius arched windows must be fabricated and tested under the same impact protocols as standard units, but the testing applies to specific size and geometry ranges. PGT and CGI both maintain NOA listings that cover curved configurations, and we build your order within those tested parameters. If a specific radius falls outside a manufacturer’s current tested range, we work with the manufacturer’s engineering team to find a compliant solution – we do not guess and we do not install without proper approval documentation.
When the permit is pulled for your Hialeah project – and yes, a permit is required for window replacements in Miami-Dade – we provide the complete NOA documentation to the building department. You get a copy too. The inspection process is part of the job, not an afterthought.
Key Takeaways
- Arched and curved windows in Hialeah are custom-fabricated – no two openings are exactly the same, and pricing reflects that.
- Miami-Dade HVHZ standards apply to curved units just as they do to rectangular ones – proper NOA documentation is non-negotiable.
- Winslow Windows & Doors has been handling custom window work in Hialeah since 2011 under Ed Winslow’s direct ownership.
- The Done Right Promise covers every installation – if it’s not right, we come back and fix it.
- Seniors and veterans receive a permanent 10% discount; no trip charge inside Miami-Dade County.
- A live person answers every call at (850) 998-3090, any time of day or night.
FAQs – Arched & Curved Windows in Hialeah
How much does it cost to replace an arched window in Hialeah?
A single arched window replacement in Hialeah typically runs between $480 and $2,800 installed, depending on the size of the unit, whether it needs to be impact-rated, and the condition of the existing frame. Small fixed-arch transoms under 24 inches wide are on the lower end; large eyebrow or full-arch units with impact glass and Low-E coating sit at the higher end. The only way to get an accurate number for your specific opening is an on-site measurement. Call (850) 998-3090 – estimates are free and there’s no trip charge inside Miami-Dade County.
Can arched windows be impact-rated for Miami-Dade’s hurricane zone?
Yes. Both PGT and CGI manufacture impact-rated curved and arched window configurations that carry Miami-Dade Notice of Acceptance (NOA) approval, which is required for all window installations in Hialeah’s High-Velocity Hurricane Zone. The key is that the radius and dimensions of your specific arch must fall within the manufacturer’s tested and approved size range. We verify this before placing any order and provide full NOA documentation for the permit and inspection. Call us at (850) 998-3090 if you want to confirm what’s available for your opening before committing to anything.
How long does it take to get a custom arched window made and installed in Hialeah?
Custom arched units are built to order, so lead time is typically four to eight weeks from order confirmation to delivery, depending on the manufacturer and current production schedules. Installation itself usually takes one day once the unit arrives. We give you milestone updates throughout the process – order confirmed, production complete, shipping en route – so you always know where things stand. If your situation is urgent (storm damage, for example), call (850) 998-3090 and we’ll tell you honestly what the fastest realistic path looks like.
Do I need a permit to replace an arched window in Hialeah, FL?
Yes. Miami-Dade County requires a permit for window replacements, including arched and curved units. Winslow Windows & Doors handles the permit application and provides the required NOA documentation to the Hialeah building department. The inspection is scheduled as part of our standard process – you don’t have to track it down yourself. Skipping the permit is not something we do, and any contractor who suggests you can skip it for a window job in Hialeah is putting your insurance coverage and resale value at risk.
Ready to Get Started? Call Winslow Windows & Doors
If you have an arched or curved window that needs replacing, upgrading to impact glass, or custom-fabricated for a new opening, Ed Winslow and the Winslow Windows & Doors team are ready to help. We’ve been doing this work in Hialeah since 2011, we pull the permits, we use impact-rated products from brands like PGT and CGI that meet Miami-Dade HVHZ requirements, and we stand behind every installation with the Done Right Promise.
Call (850) 998-3090 any time – day or night, a real person answers. Your free on-site estimate includes precise field measurements, a written line-item quote, and zero obligation. Seniors and veterans, mention your status and the 10% discount is yours automatically.
We’re not a national chain. We’re the company down the road – and Ed’s name is on every job we do.
For the full picture of what’s possible with non-standard window shapes, visit our home page or explore the complete Custom & Geometric Windows in Hialeah service page.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Hialeah.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.