Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterFast, Reliable Impact Windows Across Pembroke Park
Impact windows in Pembroke Park are a non-negotiable for any homeowner, but they’re especially critical here because this town sits squarely inside Broward County’s High-Velocity Hurricane Zone. A properly installed impact window system does more than satisfy code, it keeps your home sealed when wind-driven debris hits at 140 mph and keeps your family protected without requiring you to bolt up shutters in the dark. At Winslow Windows & Doors, we understand Pembroke Park’s specific building stock better than most, because we work in its manufactured-home communities and its 1960s concrete-block streets every week. Call (850) 998-3090 any hour and a real person answers.
Key Takeaways
- Impact windows in Pembroke Park must carry a Miami-Dade NOA or Florida Product Approval under HVHZ requirements, no exceptions.
- Manufactured-home windows open to HUD-standard sizes, so standard residential impact SKUs often won’t seat. You need a supplier who fabricates or stocks for those exact rough openings.
- Salt air here eats unprotected aluminum frames fast. We specify stainless hardware and marine-grade finishes so the job doesn’t corrode again in five years.
- Typical installed costs run $800 to $1,500 per opening, with whole-home packages from $8,000 to $25,000+ in Pembroke Park.
What Impact Windows Costs in Pembroke Park
Impact windows in Pembroke Park generally run $800 to $1,500 per window installed for standard residential openings. Single-hung impact units typically land between $900 and $1,800, while large or custom openings, sliders, or special geometry push into the $2,500 to $5,000 range. Whole-home packages across a typical three-bedroom Pembroke Park house commonly fall between $8,000 and $25,000+ depending on opening count, frame material, and whether you’re replacing jalousies or upgrading already-impact-rated glass.
| Window Type | Typical Pembroke Park Installed Range |
|---|---|
| Standard impact window (residential opening) | $800 - $1,500 per unit |
| Impact single-hung | $900 - $1,800 per unit |
| Large or custom openings / sliders | $2,500 - $5,000 per unit |
| Whole-home package (3BR typical) | $8,000 - $25,000+ |
What moves the number in Pembroke Park? Opening count first, then wind zone. Every unit here is a high-velocity hurricane zone install, so the glass and frame are already at the heavy end of the spec sheet. Floor height matters too, second-story openings catch more pressure and may need a higher design pressure rating. And here’s what most quotes won’t tell you: if you live in a manufactured home, HUD-standard rough openings mean the unit itself frequently has to be ordered to size, which changes lead time and sometimes unit cost by 10 to 15 percent over a stock residential SKU. We measure every opening, confirm the NOA for your exact configuration, and hand you a written line-item price before any work begins. Call (850) 998-3090 to schedule your free in-home measure and written quote.
Why Winslow Windows & Doors Is Pembroke Park’s Preferred Impact Windows Company
Ed Winslow’s name is on the door and on every job we do in Pembroke Park. We’ve been at this since 2011, locally owned and owner-operated, with a published address and license number. You don’t get a ticket number from us, you get Ed’s word and a crew that answers the phone when it rings. Our Done Right Promise sits behind every install: if it’s not done right, we make it right. A lasting accountability standard is not something a faceless national chain can match, and it’s why Pembroke Park homeowners keep our number saved.
We dispatch crews to Pembroke Park from our South Florida office, so we’re never more than a short drive from Southwest 25th Street, Hallandale Beach Boulevard, or any mobile home park off West County Road. Our technicians are background-checked and arrive in uniform, so you know exactly who’s walking onto your property. And every call is answered by a live person, 24 hours a day, seven days a week. No voicemail loops. No call centers.
We install Impact Windows from eight authorized brands, including PGT, CGI, CWS, and ES Windows, and we stock or fabricate manufactured-home-sized units that most installers in this area cannot order. When you call us about a Pembroke Park mobile home, we already know the openings won’t match a residential price sheet. That kind of local knowledge can’t be faked, and it’s exactly what this town needs.
Our Impact Windows Services in Pembroke Park
Impact Window Installation for Manufactured Homes
Pembroke Park’s residential fabric is unusually dominated by mobile home parks and manufactured housing communities for a Broward municipality. That changes everything about window and door replacement. Manufactured-home openings follow HUD-standard nominal sizes that rarely match standard residential impact-window SKUs. Order off a typical residential price sheet and the units won’t seat properly, leaving gaps that fail wind-mitigation inspections. We maintain supplier relationships specifically for mobile-home-rated impact windows in exact HUD dimensions, and every unit we install still carries a current Miami-Dade NOA for HVHZ compliance. This intersection of manufactured-housing specs and impact requirements is a combination most neighboring cities rarely encounter at the same volume.
Impact Window Replacement for Older Concrete-Block Homes
Pembroke Park’s 1950s to 1970s concrete-block houses still show up with original jalousie or single-pane aluminum windows. Those units are entirely non-compliant with current HVHZ impact requirements, and the salt air near the Atlantic has spent decades pitting the frames and corroding the hardware. We pull the old sashes, address any oxidated jambs, and install PGT or CGI impact-rated units with marine-grade hardware specified for coastal exposure. The result is a sealed opening that actually meets Florida Product Approval, not just a nicer-looking version of the same failing window.
Impact Sliding Glass Doors and Patio Doors
Sliding glass doors in Pembroke Park take the full brunt of storm pressure and salt exposure. Older aluminum tracks corrode until the door binds or leaks, and laminated glass is the only thing that keeps windblown debris on the outside. We size replacement sliders to your exact rough opening, confirm design pressures for the position on your home, and install with stainless rollers and sealed tracks that won’t seize three seasons in. Every slider we install is NOA-listed for the configuration.
Custom and Geometric Impact Windows
Some Pembroke Park homes, particularly concrete-block builds from the 1960s with specific architectural shapes, have openings that don’t match any stock impact window. We handle custom geometry, from radius tops to trapezoid openings, ordered with laminated impact glass and a Miami-Dade NOA for the exact size. Custom fabrication typically runs four to six weeks, but once your units arrive, installation can be completed in as fast as a single day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Impact Windows Problems We See in Pembroke Park Homes
- Salt-air oxidation on unprotected aluminum frames. Proximity to the Atlantic means airborne salt settles on window frames and sashes year-round. Frames not sealed for marine exposure start pitting within a half-dozen years, and hardware corrodes to the point of failure. We specify stainless-steel hardware and marine-grade finishes because the inland spec simply won’t survive here.
- Manufactured-home openings that don’t accept standard impact SKUs. This is the single most common issue we walk into in Pembroke Park’s mobile home communities. HUD-standard nominal sizes are not residential sizes, and forcing a standard unit leaves gaps that fail wind-mitigation inspection. We order to the opening.
- Original jalousie windows lacking laminated interlayers. Many 1950s to 1970s homes in Pembroke Park still run jalousies or single-pane aluminum. Even small windblown debris breaches those sashes and pressurizes the home during a storm, which is exactly the failure mode impact glass is designed to prevent.
- Design-pressure rating degradation over time. Salt and humidity slowly attack seals, frames, and mounting hardware. An impact window’s design pressure rating is only as good as the condition of the frame and anchoring system. We inspect the full assembly, not just the glass, when we quote a replacement.
Trusted Brands We Service in Pembroke Park
We’re an authorized installer for PGT, CGI, CWS, and ES Windows, among others, which means you get factory-backed products installed by a crew that installs them daily. For Pembroke Park’s manufactured-home communities, we maintain relationships with suppliers who stock or fabricate mobile-home-rated impact windows in HUD-standard dimensions, so the lead time is shorter than you’d expect from an installer who only orders residential SKUs. If you need a specific NOA for your opening size and configuration, we can pull it before you sign anything. We service every brand we install, and we stand behind the work with our Done Right Promise.
Pricing for Impact Windows in Pembroke Park, FL
You already have the range: $800 to $1,500 per window installed for standard residential openings in Pembroke Park, single-hungs $900 to $1,800, large or custom units $2,500 to $5,000, whole-home packages $8,000 to $25,000+. What separates a fair quote from a bad one here is whether the installer knows Pembroke Park’s building stock. Manufactured-home units cost a bit more because they’re ordered to HUD rough openings. Old concrete-block homes often need jamb repair before the new unit goes in. We price all of that in the written line-item estimate, and the number doesn’t move once work starts. Free in-home measure, no trip charge, free second opinion on any written estimate you already have. Call (850) 998-3090.
Florida Pays You Back
Florida has real incentives for impact-window upgrades, and they stack in your favor. My Safe Florida Home matching grants can cover up to $10,000 for qualifying wind-mitigation improvements. Florida also offers a sales-tax exemption on impact-resistant windows and doors, which saves you 6 to 7 percent right at purchase. The federal 25C energy credit gives you back 30 percent of product cost, up to $600 per year on qualifying energy-efficient units. And after a wind-mitigation inspection, which runs about $75 to $150, many Pembroke Park homeowners see windstorm-premium credits averaging around 25 percent on the windstorm portion of their policy. Programs and carriers set final numbers, so we can’t guarantee any specific credit, but we can point you to the right paperwork and the right inspection professional.
One comparison worth making before you decide: impact windows versus hurricane shutters. Shutters only protect you if someone is home to deploy them and they don’t stop wind-driven rain or pressurization when left open. Impact windows are permanent protection. No panels to hang. No tracks to maintain. No decision to make at 11 p.m. while a hurricane warning flashes on your phone. For Pembroke Park homeowners who live in manufactured-home communities, where boarding up is harder and access is tighter, permanent impact glass is almost always the better investment.
We Also Serve Cities Near Pembroke Park
Our crews cover Pembroke Park and the surrounding South Florida municipalities. If you’re in Impact Windows in Pembroke Park territory, we’re already working in your neighborhood. We also serve Hialeah, Miami, Miami Beach, and Pembroke Pines, bringing the same local knowledge and salt-air material specs to each. Wherever you are in these cities, the number is the same: (850) 998-3090.
Serving Pembroke Park, FL - Our Local Coverage Area
We’re based in the Pembroke Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows in Pembroke Park
Yes. Broward County’s HVHZ requirements apply to the window and door products installed in Pembroke Park regardless of whether the home is site-built or manufactured. The unit itself must carry a current Miami-Dade NOA or Florida Product Approval for its size and configuration. We order manufactured-home-sized impact windows with the same NOA paperwork as any residential unit. Call (850) 998-3090 and we’ll confirm the NOA for your exact opening before you commit.
Salt air. Pembroke Park sits close enough to the Atlantic that airborne salt settles on aluminum frames and hardware daily. That salt accelerates oxidation, pitting jambs and sashes within five to seven years on units that aren’t sealed for marine exposure. We specify stainless-steel hardware and marine-grade finishes on every coastal install, which is why our Pembroke Park jobs don’t look like the corroded originals we replace. Call (850) 998-3090 for a free assessment of your existing frames.
PGT, CGI, and ES Windows all offer manufactured-home-sized impact units with Miami-Dade NOA listings for those exact dimensions. The catch is that most residential installers don’t stock or order them, because the volume isn’t there for a residential-focused shop. We maintain supplier relationships specifically for HUD-standard openings, so we can get Pembroke Park manufactured-home windows quoted accurately and installed without gaps. Call (850) 998-3090 and mention you’re in a manufactured home.
Salt air attacks the frame, the hardware, and the sealant, not the laminated glass itself. But if the frame corrodes, the anchoring weakens, and the assembly can’t hold the design pressure it was rated for. We’ve pulled units in Pembroke Park where the glass was fine but the frame had pitted to the point of structural failure within a decade. Specifying marine-grade hardware and sealed jambs from day one is the difference between a 10-year window and a 25-year window here. Call (850) 998-3090 and we’ll inspect your openings for oxidation before you spend money on glass.
Almost never. Jalousie frames are not designed to carry the weight or the loads of laminated impact glass, and the aluminum is usually already compromised by salt-air pitting. Reusing the frame voids the NOA and leaves the opening non-compliant with Broward’s HVHZ requirements. The right fix is a full frame replacement with a properly anchored impact unit. That’s what we do in Pembroke Park, and it’s the only way the window will pass a wind-mitigation inspection. Call (850) 998-3090 for a free in-home measure.
What We Saw on Southwest 25th Street
We replaced corroded single-pane aluminum windows in a 1960s concrete-block home on Southwest 25th Street with PGT impact-rated casement windows carrying a Miami-Dade NOA. The original jalousie frames had salt-air pitting around the jambs, so we specified stainless-steel hardware and sealed every jamb to stop the oxidation that had rotted the old sashes within five years. That job is a perfect picture of Pembroke Park’s failure mode: the house wasn’t struck by a hurricane, it was slowly eaten by the Atlantic air. The new units are rated for the wind, mounted with hardware that won’t corrode, and sealed against the salt that killed the originals. That’s the difference between a window and a marine-grade window.
Impact windows engineered for manufactured homes. NOA-listed for HVHZ. Built for salt air. Done right the first time, or we come back.
Call Ed Winslow and the team at Winslow Windows & Doors at (850) 998-3090 for your free in-home measure and written Pembroke Park estimate. The one down the road.
Written by Ed Winslow, Owner at Winslow Windows & Doors, serving Pembroke Park with impact windows, doors, and roofing since 2011.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.