Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCWS Shingle, Tile & Metal Roofing in Hialeah: What to Know First
CWS shingle, tile, and metal roofing repair in Hialeah typically runs between $450 and $2,800 depending on the material, the extent of the damage, and whether we’re matching existing profiles or replacing full sections. Most CWS roofing jobs in Hialeah are completed same-day or next-day once we’ve assessed the damage, because we keep common profiles and fasteners in our local stock. We’re an independent CWS service provider, and our estimates are always free, line-itemed, and honored to the penny.
This page is for Hialeah homeowners who have a CWS roof already on the house, or who are deciding whether to keep repairing what they have versus replacing it. If that’s you, call (850) 998-3090 and a live person picks up, day or night. No voicemail loop, no call center.
How CWS Products Fail - and How We Fix Them
Every roofing brand has fingerprints. After years of working on CWS roofs across Hialeah, here’s what actually fails and why.
- Shingle cupping and lifting at the eave line. CWS asphalt shingle lines, on older Hialeah homes especially, show pattern cupping along the first three courses from the roofline. It’s usually not the shingle itself. It’s under-driven nails from the original install, combined with Hialeah’s high humidity causing the underlayment to swell. We pull the affected courses, inspect the nail pattern, refasten to code, and reset the rows, not just glue the corners down.
- Tile slippage on low-slope sections. CWS tile profiles, particularly their flat Roman and low-profile mission shapes, drift on roof planes below 4:12 pitch. South Florida’s torrential afternoon storms push water under the leading edge once a tile’s lifted even a quarter inch. We see this most on Hialeah’s older concrete-block ranchers where re-roofs were done in the 2000s. The fix isn’t nailing the loose tile back, it’s pulling the field, checking the batten spacing, and resetting with proper headlap and storm clips.
- Metal roof oil-canning and screw-point leaks around penetrations. CWS standing seam and the ribbed metal profiles they offer show premature screw grommet degradation in Hialeah’s salt-laced air, especially within a mile of the county’s eastern wetlands. Homeowners notice rust streaks first, then drip stains on the ceiling after a hard east wind. We replace the failed fasteners with gasketed screws rated for coastal exposure, and rebed every penetration, not just the obvious ones.
- Flashing failures where the roof meets the parapet wall. This one is not unique to CWS, but it shows up on their tile and metal installs in Hialeah because so many homes have flat parapet roofs. The step flashing gets buried under stucco, water gets in through hairline cracks, and nobody finds it until the ceiling shows a coffee-colored stain. We cut back the stucco, replace the flashing, and re-seal with a membrane that moves with the house.
- Underlayment failure under tile on re-roofs from the 1990s. CWS tiles hold up, but the felt under them doesn’t. In Hialeah’s wet season, a 25-year-old underlayment is often already failing at the laps. We get called for “leaking tile” when the tile is actually fine and the paper underneath is gone. That’s a bigger job, but we’ll tell you the truth up front: you can’t fix it tile by tile.
Our CWS Shingle, Tile & Metal Roofing Process
Here’s what a CWS roofing job with us actually looks like, step by step.
- 1
Live call and straight conversation. You call (850) 998-3090, a person answers, we ask what you’re seeing, we book a time that works for you. No “window of availability” nonsense. If it’s urgent, we’ll work you in.
- 2
On-site inspection with photos you keep. Our tech walks the roof, documents what’s failing, and shows you the photos before anything is recommended. If it’s a minor fix, we’ll say so. We don’t inflate the problem.
- 3
Parts decision, made together. For CWS profiles, we explain the trade-off between OEM parts and quality aftermarket equivalents. Some aftermarket fasteners and underlayments outperform the originals in Hialeah’s humidity. But when matching existing tile color or shingle profile, OEM is the only way to avoid a visible patch. We lay out both options and let you choose.
- 4
The repair or replacement, done clean. Ed Winslow’s crew does the work, with background-checked, uniformed technicians on your property. We protect your landscaping, keep the job site tidy, and clean up every nail from the driveway before we leave. Ed grew up around Westland helping his uncle patch concrete-block homes, so the detail work is personal.
- 5
Water test and photo record. We test the repair, photograph the finished work, and walk you through what was done. You’ll have a written record of the parts used and the date of the repair.
- 6
Done Right follow-up. If anything we touched fails, the Done Right Promise applies. Ed’s name is on the truck and on the warranty, and that’s not something he takes lightly.
What CWS Shingle, Tile & Metal Roofing Costs in Hialeah
Here are the honest price ranges we quote for common CWS roof work in Hialeah. The number depends on the scope, the access, and whether we’re patching or replacing.
- Shingle repair (small patch, 1-5 shingles): $450-$750
- Shingle section replacement (one roof plane): $1,200-$2,800
- Tile repair (single tile reset or replacement): $350-$600
- Tile section reset with new underlayment: $1,800-$3,500
- Metal roof leak repair (penetrations and fasteners): $500-$1,400
- Full metal panel replacement (small standing seam section): $2,200-$4,800
What moves the price: roof height, access difficulty, whether the existing material is still in production, and whether we’re pulling permits. Call (850) 998-3090 for an exact line-item quote on your CWS roof. Estimates are free, and there’s no trip charge inside our home county.
Why Hialeah Homeowners Call Winslow Windows & Doors for CWS Work
We’re not a national chain with a rotating crew. We’re the one down the road, owned by Ed Winslow, with a published address and license number. When you call us about a CWS roof, you’re talking to people who know this brand’s quirks, not a dispatcher reading from a script. We’ve been doing this since 2011, and in that time we’ve become the authorized installer for eight brands: PGT, CGI, ES Windows, ECO Window Systems, and others. That matters when your CWS roof is part of a bigger exterior envelope that includes windows and doors. We see the whole house, not just one trade.
Our techs are background-checked and arrive in uniform, so you know who’s on your property. Our pricing is upfront, our estimates are free, and we offer a free second opinion on any written estimate you’ve received. If you’re a senior or a veteran, you get a permanent 10% discount. If your repair is over $200, take $40 off. Those aren’t promos. They’re just how we do business.
FAQs
No, not when the repair is done correctly by an independent contractor using appropriate materials. CWS warranties cover manufacturing defects, not installation or repair work. As an independent CWS service provider, we document every repair with photos and a parts list, which protects your position if you ever file a warranty claim.
If your CWS tile profile is still in production, we can usually match it close enough that the patch is invisible from the ground. If it’s discontinued, we carry a few Hialeah-era profiles in our shop and can often source discontinued lots through salvage and supply networks. We’ll show you the color match before we install anything. Call (850) 998-3090 and we’ll take a look.
For an active leak, we typically get a technician out same-day or next morning, and we answer the phone live 24/7, so you’ll never wait for a callback when water is coming in. We’ll tarp it if needed and schedule the permanent fix right away.
If the roof is under 15 years old and the damage is localized, repair is almost always the smarter money. If the underlayment under tile is failing across multiple sections, or your shingle roof is past 20 years and showing granule loss on the majority of the field, replacement becomes the honest recommendation. We’ll tell you which one you need, and we’ll show you the evidence on your own roof. Estimates are free.
Yes. For any roof replacement or structural repair, we pull the required Hialeah permits and schedule the inspections. For simple shingle or tile repairs that don’t involve structural work, permits typically aren’t required, but we’ll tell you if your job crosses that line before we start.
If your CWS roof is acting up, call (850) 998-3090. You’ll get a real person, a straight answer, and a free estimate. Ed Winslow’s name is on the door, and on every job we do.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.