Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Therma-Tru Roof Replacement & Installation in Hialeah: What to Know First
We’re an independent Therma-Tru service provider, and we handle roof replacement and installation for Hialeah homeowners who own Therma-Tru entry systems, patio doors, and the surrounding roof structures that protect them. Most Therma-Tru-related roof work in Hialeah runs $600 to $2,400 for flashing replacement, underlayment repair, or localized roof section replacement around door openings, with full roof replacement starting around $8,500 depending on square footage and material. This page is for homeowners in Hialeah who’ve spotted water staining near a Therma-Tru door, noticed daylight through rotted flashing, or simply want a straight answer on what their roof actually needs. Call (850) 998-3090 and a live person answers, day or night.

How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds solid entry doors. But the roof around them is a different story, and in Hialeah’s climate, we see the same failure patterns repeat themselves year after year. Here’s what actually happens:
- Rot at the sill-to-sheathing junction on Classic-Craft and Smooth-Star doors. Hialeah’s afternoon thunderstorms dump water sideways. If the door was installed without proper sill pan flashing or the roof overhang is short, water wicks behind the brickmold and rots the roof sheathing directly above the door. We remove the rotted sheathing, install new flashing integrated with the roof underlayment, and rebuild the opening properly.
- Failed roof flashing on Fiber-Classic and Pulse series patio door installations. These are wider openings that need step flashing and counter-flashing tied into the roof plane. Many original installs in Hialeah’s older concrete-block homes used roof cement alone, which cracks within two or three seasons of thermal cycling. We strip it, install proper step flashing, and re-bed everything with polyurethane sealant rated for South Florida UV exposure.
- Underlayment breakdown above Therma-Tru transoms and sidelites. Transom windows over entry doors are beautiful and they leak constantly if the roofer didn’t lap the underlayment correctly. We see this on Benchmark and Traditions lines in Hialeah neighborhoods like Palm Springs and Miami Lakes. The fix is removing shingles or tile above the transom, replacing the compromised underlayment, and re-flashing the entire head condition.
- Roof deck sagging at wide Therma-Tru multi-point locking door openings. These doors are heavy, and on older Hialeah homes with 2×4 trusses at 24-inch spacing, the load transfers to the header and roof structure. Over time, that section of roof sags and water ponds. We add structural support, re-slope the affected roof section, and restore proper drainage before reinstalling the door assembly.
- Tile roof failure directly above Therma-Tru storm doors. Hialeah has a lot of barrel tile roofs, and the tiles closest to the drip edge above a door are the first to crack or slip. When a tile shifts, water gets under the field and runs down to the door head. We replace the broken tile, check the felt underneath, and make sure the drip edge extends far enough to keep water off the Therma-Tru frame.
Our Therma-Tru Roof Replacement & Installation Process
Every Therma-Tru roof job follows the same disciplined sequence, whether it’s a flashing repair or a full roof section replacement:
- 1
We listen first. You tell us what you’ve seen: a stain, a drip, a musty smell near the door. We ask about when it happens and which direction the weather comes from.
- 2
We inspect the roof-to-door connection. This is where most contractors stop. We don’t. We check the flashing, the underlayment, the sheathing, and the drainage path all the way to the gutter or drip edge.
- 3
We decide on parts with you, not for you. If OEM Therma-Tru components are available and your warranty is active, we use them. If aftermarket flashing or underlayment performs better for the specific condition, we tell you why and show you the difference in writing.
- 4
We do the work clean. Roof work above a finished entry is messy if done wrong. We protect the door, the floors, and the landscaping. Tarps go down before any material comes off the roof.
- 5
We test before we leave. On flashing and underlayment work, we run a hose test to simulate Hialeah’s wind-driven rain. If water gets through, we’re not done.
- 6
We stand behind it. Every job carries the Done Right Promise. If it’s not done right, we make it right. Period.
What Therma-Tru Roof Replacement & Installation Costs in Hialeah
Here’s the honest math on what Hialeah homeowners pay for Therma-Tru-related roof work:
- Flashing repair or replacement around one door: $600 to $1,200, depending on whether it’s a single door or a sidelite configuration.
- Underlayment replacement above a transom or patio door: $800 to $1,600, including removal and reinstallation of the roofing material above the opening.
- Roof sheathing replacement around a Therma-Tru opening: $1,500 to $2,800, including structural assessment and any framing repair.
- Full roof section replacement (8×12 or smaller) tied to a Therma-Tru entry: $3,500 to $6,000 for shingle; $6,000 to $12,000 for tile.
- Complete roof replacement for an average Hialeah home: $8,500 to $18,000 depending on roofing material, pitch, and square footage.
What moves the price: whether we’re dealing with shingle or tile, how much sheathing has to come out, whether the trusses or rafters need attention, and how high the roof is. We give you a written, line-item quote before any work starts, and the number on that quote is the number you pay. No change orders. No surprises. Call (850) 998-3090 and we’ll walk the roof with you and put the numbers on paper. Estimates are free.
Why Hialeah Homeowners Call Winslow Windows & Doors for Therma-Tru Work
Ed Winslow founded this company in 2011, and he grew up in the Westland area of Hialeah, spending summers helping his uncle patch windows on the older concrete-block homes that line the neighborhood streets. That’s not a marketing story. It’s why we treat every Therma-Tru roof job like it’s on a neighbor’s house, because in Hialeah, it usually is. We’re an authorized installer for eight premium brands, so when a Therma-Tru roof issue also involves a door or window that needs attention, we can handle the whole scope without bringing in a second crew. PGT, CGI, CWS, ES Windows - we know how they interact with the roof system around a Therma-Tru opening because we install them too. Every technician who shows up at your door is background-checked and in uniform, so you know exactly who’s on your property before the ladder comes off the truck. Ed’s name is on the door and on every job we do.
FAQs
In most cases, no. Roof flashing around a Therma-Tru door is part of the building envelope, not the door assembly itself. We stay within warranty-safe practices, use OEM parts when your warranty is active, and document everything with photos and written notes. If Therma-Tru ever questions the work, you’ll have a clean paper trail. Call (850) 998-3090 if you want us to review your specific warranty before we start.
Yes. We work with the shingle and tile manufacturers most common in Hialeah, including the barrel tile profiles you see on older Miami-Dade homes. If your specific tile has been discontinued, we source close matches from local suppliers and show you samples before we order. The goal is a roof that looks like it was never touched.
Most flashing and underlayment repairs around a Therma-Tru entry are done in a single day. Full roof section replacements run two to three days, depending on weather and material availability. Before we schedule, we give you a written timeline and we stick to it.
Yes. Any roof replacement or structural work in Hialeah requires a permit, and we pull them ourselves. The permit is posted, the inspection is scheduled, and we don’t consider the job done until it passes. That’s non-negotiable for us, and it protects you.
We’ll tell you. If the inspection shows water intrusion beyond the door opening, we give you an honest assessment of the full scope, not just the visible symptom. You’ll get a written quote for everything, and you can choose what to do now and what to plan for later. No pressure. Call (850) 998-3090 for a free estimate.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Hialeah and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After